Differences

This shows you the differences between two versions of the page.

--- en:guides:conspy [2010/07/30 18:31]
bellard
+++ en:guides:conspy [2017/05/19 18:51] (current)
hgt replaced broken link
@@ Line 1: / Line 1: @@
 ====== Conspy : tiny screen or VNC ======
-Slitaz core provides the 10Kb conspy to get remote control of Linux virtual consoles. See http://ace-host.stuart.id.au/russell/files/conspy/
+Slitaz core provides the 10Kb conspy to get remote control of Linux virtual consoles. See http://conspy.sourceforge.net/
 Slitaz opens 6 virtual consoles which you can access with Ctrl-Alt-F1 to Ctrl-Alt-F6. You can connect to console 1 with //conspy 1// and console n with //conspy n// or the current active console with //conspy// (root user only).
 To exit from conspy (and the virtual console) press the escape key three times in quick succession.
 ===== Conspy as screen (session manager) =====
@@ Line 25: / Line 24: @@
 box$ exit
 </code>
+<note tip>
+With a recent busybox (see below) you can skip the openvt step:
+<code>
+home$ ssh tux@slitazbox
+box$ su
+box# conspy -cs 28
+# some commands
+...
+# <ESC><ESC><ESC>
+box# exit
+box$ exit
+</code>
+</note>
 Later:
 <code>
@@ Line 47: / Line 59: @@
 box$ exit
 </code>
+<note tip>
+With a recent busybox (see below) you can skip the deallocvt step:
+<code>
+home$ ssh tux@slitazbox
+box$ su
+box# conspy 28
+# clear; exit
+<ESC><ESC><ESC>
+box# exit
+box$ exit
+</code>
+</note>
 If you prefer to use screen, see http://www.gnu.org/software/screen:
 <code>
@@ Line 79: / Line 103: @@
 </code>
+===== X11VNC Autostart  =====
+If you'd like to start X11VNC automatically you must edit /home/$USER/.xinitrc with:
+<code> # nano /home/tux/.xinitrc </code>
+<file>
+# ~/.xinitrc: Executed by slim login manager to startx X session.
+# You can use F1 with Slim to change your window manager or configure
+# it permanently with your personal applications.conf file.
+#
+. $HOME/.config/slitaz/applications.conf
+############################################################
+## ATTENTION!!! INSERT THE FOLLOWING LINE AFTER .conf FILE CALL
+/etc/init.d/x11vnc start &
+case $1 in
+	e17|enlightenment*)
+...
+</file>
+**DO NOT USE** the Autostart Programs option under OpenBox or Daemon tricks, it will start a X11VNCserver before a X11server and crash the VNC after the first client connection. So you'll only connect once to the server (and it's not desirable in support environments).
+===== Conspy and slow connections =====
+Launch a very verbose command into a conspy and the output is displayed at full speed in the virtual console whatever your connection speed to the remote box is (even if your connection is broken).
 ===== Conspy and Busybox =====
-Conspy is a busybox applet since busybox 1.17.0. It add 2.5Kb to busybox and supports some new opions:
+Conspy is a busybox applet since busybox 1.17.0. It adds 2.5Kb to busybox, has better terminal support and supports some new options:
   * -c to create missing devices (/dev/vcsaXX and /dev/ttyXX)
-  * -d for screen shot<code>conspy -d 28 > screen28.txt</code>
+  * -d for screen shot<code># conspy -nd 28 > screen28.txt</code>
-  * -s to launch a shell<code>conspy -cs 28</code>
+  * -s to launch a shell<code># conspy -cs 28</code> (no more openvt/deallocvt)
+  * -x COL -y LINE upper left corner position
+  * -f follow cursor with automatic scrollings
-Conspy applet is enabled in busybox package. Conspy package is no more useful with a rescent busybox.
+The conspy applet is enabled in the busybox package. The conspy package is no longer more useful than the recent busybox and will be removed from the packages database.
 ----

en/guides/conspy.1280507487.txt.gz · Last modified: 2010/07/30 18:31 by bellard

SliTaz Doc

Differences