SliTaz GNU/Linux official and community documentation wiki.
.png

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:guides:dialup [2010/03/17 11:30]
kultex
en:guides:dialup [2010/08/22 17:21] (current)
linea
Line 3: Line 3:
 The # sign means that you do this command as root on your console: The # sign means that you do this command as root on your console:
  
-===== Automatic ​installation ​=====+===== Automatic ​Installation ​=====
  
-the new hwsetup ​adds now automatic installation for 3G (still in trial version)+The new hwsetup ​in SliTaz 3.0 now adds automatic installation for 3G (still in trial version).
  
-download hwsetup from here: http://​labs.slitaz.org/​projects/​show/​setup+<​code>#​ tazhw setup 3g-modem<​/code>
  
-install hwsetupupgrade ppp and rp-pppoe ​and install nedded apps+Now open the wvdial box by typing yenter your data (as described in wvdial.conf),​ save the configuration (if you don't save you risk breaking your pin), dial the pin (you have to do this only once you plug in your modem), then start dialing ​and you should be connected.
  
-<​code>#​cd Downloads (or where you downloaded hwsetup) +===== Manual ​Installation ​=====
-#tazpkg install hwsetup-1.x.tazpkg +
-#tazpkg upgrade ppp +
-#tazpkg upgrade rp-pppoe +
-#tazhw setup 3g-modem</​code>​ +
- +
-open now wvdial box by typing y, enter your data (as descibed in wvdial.conf) - save it (if you dont save, you risk to break your pin) dial the pin once, then dial and you should be connected. +
- +
-===== Manual ​installation ​=====+
  
 <​code>​ <​code>​
Line 36: Line 28:
  
 <​code>​ <​code>​
-# modprobe option ​ (Huawei E220, E160g)+# modprobe option ​ (Huawei E220, E160g, Venus-VT12)
 </​code>​ </​code>​
  
 Please help update which modem or phone is using which module using the forum post: http://​labs.slitaz.org/​issues/​show/​149. You will find if your modem is supported by linux-dialup. Please help update which modem or phone is using which module using the forum post: http://​labs.slitaz.org/​issues/​show/​149. You will find if your modem is supported by linux-dialup.
 +
 +There is an extra guide for the [[http://​doc.slitaz.org/​en-guides:​cricket-a600|Cricket-a600]]
  
 For automatization load the module at startup with your Slitaz Control Box. For automatization load the module at startup with your Slitaz Control Box.
Line 51: Line 45:
 </​code>​ </​code>​
  
-<code>+<file>
 [Dialer pin] [Dialer pin]
 Modem = /​dev/​ttyUSB0 Modem = /​dev/​ttyUSB0
Line 78: Line 72:
 Password = drei.at...........................!!here'​s your Passw!! Password = drei.at...........................!!here'​s your Passw!!
 Phone = *99#​.................................!!here'​s your Phone!! Phone = *99#​.................................!!here'​s your Phone!!
-</code>+</file>
  
 All the needed data can be found here: All the needed data can be found here:
Line 103: Line 97:
 </​code>​ </​code>​
  
-<code>+<file>
 nameserver 213.94.78.16........................!!here'​s your DNS!! nameserver 213.94.78.16........................!!here'​s your DNS!!
-</code>+</file>
  
 If you want to dial out as user - add yourself to the group "​dialout"​ (cat /etc/group) and set the permissions for wvdial and wvdial.conf. If you want to dial out as user - add yourself to the group "​dialout"​ (cat /etc/group) and set the permissions for wvdial and wvdial.conf.
  
-For automatization you can put a script in /​usr/​local/​bin called umts-connect (executable)! From here its not proved, because I connect from the console, but it should work like this!+For automatization you can put a script in /​usr/​local/​bin called umts-connect (executable)! From here it'​s ​not proved, because I connect from the console, but it should work like this!
  
 <code bash> <code bash>
Line 125: Line 119:
 You can also put a desktop entry in /​usr/​share/​applications with the name umts.desktop ​ You can also put a desktop entry in /​usr/​share/​applications with the name umts.desktop ​
  
-<code>+<file>
 [Desktop Entry] [Desktop Entry]
 Encoding=UTF8 Encoding=UTF8
Line 135: Line 129:
 Icon=/​usr/​share/​icons/​.................whatever you want Icon=/​usr/​share/​icons/​.................whatever you want
 Categories=Application;​Network;​ Categories=Application;​Network;​
-</code>+</file>
  
 Please check Exec=/​usr/​local/​bin/​umts-connect for permissions. Please check Exec=/​usr/​local/​bin/​umts-connect for permissions.
Line 141: Line 135:
 Here is the forum post about this: http://​forum.slitaz.org/​index.php/​discussion/​comment/​440/#​Comment_440 Here is the forum post about this: http://​forum.slitaz.org/​index.php/​discussion/​comment/​440/#​Comment_440
  
 +
 +---- 
 +\\
 +^  Page Review Section ​ ^^ 
 +|Quality| Good  |
 +|Review| Minor Updates ​ |
 +|Priority| Medium |
 +|Problems| add a [[http://​forum.slitaz.org|forum post link]]|
 +|:::     | OR add a [[http://​labs.slitaz.org/​issues |lab issue tracker link ]]|
 +|How to Improve| Suggest briefly|
 +|::: |  |
 +
 +\\
 +----
 
en/guides/dialup.1268821852.txt.gz · Last modified: 2010/07/08 17:16 (external edit)