SliTaz GNU/Linux official and community documentation wiki.
.png

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:guides:webcam [2014/04/18 18:13]
pankso
en:guides:webcam [2014/04/20 09:21] (current)
linea
Line 2: Line 2:
  
  
-Slitaz ​provide ​all the necessary tools to take picture, record and strean a webcam output.+Slitaz ​provides ​all the necessary tools to take pictures, record and stream ​webcam output.
  
  
 ===== Installation ====== ===== Installation ======
  
-by default your webcam may not be detected due to missinf ​kernel drivers and this is normal since SliTaz ​dont provide webcam support on the LiveCD. To install ​the drivers ​and load it:+By default your webcam may not be detected due to missing ​kernel drivers and this is normal since SliTaz ​doesn'​t ​provide webcam support on the LiveCD. To install and load the drivers:
  
  
Line 13: Line 13:
   # modprobe uvcvideo   # modprobe uvcvideo
   ​   ​
-You can check if the kernel ​loaded ​correctly the module with: 'dmesg | tail'. The webcam may be used with +You can check if the kernel correctly ​loaded ​the module with: 'dmesg | tail'. The webcam may be used with 
-skype and other visio tools. To try the webcam with Mplayer:+skype and other visual ​tools. To try the webcam with Mplayer:
  
   $ mplayer tv:// -tv driver=v4l2:​device=/​dev/​video0 -vo x11   $ mplayer tv:// -tv driver=v4l2:​device=/​dev/​video0 -vo x11
Line 21: Line 21:
 ===== Pictures and recording === ===== Pictures and recording ===
  
-To take pictures or record the webcam you van install ​and use Mplayer:+To take pictures or record ​using the webcam you can install Mplayer:
  
   # tazpkg -gi mplayer   # tazpkg -gi mplayer
 
en/guides/webcam.1397837623.txt.gz · Last modified: 2014/04/18 18:13 by pankso