SliTaz Doc

NoMachine (NX) is a propietary remote desktop system, supporting multiple hosts and keypair-based log-ins.

There are three parts to a NX system:

1. the server is the machine to which you connect;
2. the node is one in a group of resources that hosts your session - this can be the server;
3. the client that connects to a server (and in turn, the node).

There are three packages available to download from NoMachine. All clients must have installed the client package, whereas all three packages must be installed on servers and nodes. This is because parts of the client package is used by the node, parts of which are used by the server.

• Decompress the three NX packages (client, node, server) on the server into /usr to create /usr/NX directory.
• Decompress the client package on the client(s).

The automated commands are not compatible with BusyBox and the SliTaz configuration, so the installation commands need to be edited:

• Create the symlinks /etc/rc.d/rc#.d/ all pointing to /etc/init.d/. This can be easily achieved with the following command performed as the root user:
• for NUM in 0 1 2 3 4 5 6 ; do cp /etc/rc.d/init.d /etc/rc.d/rc$NUM.d; done

• Modify /usr/NX/scripts/setup/nxserver by:
  • fixing the user add/del commands in lines 924, 963, 984.
  • comment out the command in line 956 by placing a hash immediately after the opening quotation mark (command not needed)
• Install the server: sudo /usr/NX/scripts/setup/nxserver –install fedora
  • the OS doesn't really matter but it's the closest match for the numerous /etc/init.d commands
• Change the server name & SSH port (if necessary) in /usr/NX/etc/server.cfg (line 31, 36 & 236)
• Allow administrative logins in line 87 of /usr/NX/etc/server.cfg

The automated commands are not compatible with BusyBox and the SliTaz configuration, so the installation commands need to be edited:

• Modify /usr/NX/scripts/setup/nxnode by:
  • specify SSH port in line 43 (if necessary)
  • change to local.sh on line 1305

• Install the node: sudo /usr/NX/scripts/setup/nxnode –install fedora
  • ignoring warning about CUPS detection if you don't have a printer
• Change server name & SSH port (if necessary) in /usr/NX/etc/node.cfg (line 32, 342)

• Enable the nx user account by using: sudo passwd -u nx
• Confirm this with: sudo /usr/NX/bin/nxserver –usercheck username

NX> 900 Verifying public key authentication for NX user: //username//.
NX> 900 Adding public key for user: //username// to the authorized keys file.
NX> 716 Public key added to: /home/ //username// /.ssh/authorized_keys2.
NX> 900 Verifying public key authentication for NX user: //username//.
NX> 900 Public key authentication succeeded.
NX> 999 Bye.

You should now be able to log-in to the server/node using a normal username and password.

When the default key pair authenticates correctly, they should be regenerated for security reasons. Issue the following command to create a new key pair: sudo /usr/NX/bin/nxserver –keygen

New keys should be created. Distribute the secret key /usr/NX/share/keys/default.id_dsa.key to clients and import it in the client GUI (Configure > General > Server > Key… > Import).

Restart the server (sudo /usr/NX/bin/nxserver –restart) to complete the changes.

• If you want to use key pair and password-less authentication, ammend /etc/ssh/sshd_config with:

PasswordAuthentication no AllowUsers nx other usernames

• Open ports 5000-5200 for an unencrypted connection. This is because after a successful authentication has taken place the client reconnects to a display in the range starting at 'DisplayBase' up to the value ('DisplayBase' + 'DisplayLimit'). These parameters default to the values “1,000” and “200” respectively and TCP port numbers are obtained by adding the value “4,000” to the display numbers, thus giving 5000 and 5200. If encrypted display is enabled, all traffic is piped through SSH.

• If the client fails to connect to the server with the following messages:

NX> 203 NXSSH running with pid: //PID//
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: //IP address// on port: //SSH port//
NX> 202 Authenticating user: nx
NX> 208 Using auth method: publickey
NX> 204 Authentication failed.

then the /usr/nx/home/nx/.ssh/authorized_keys2 file is likely at fault.